5.0 Release Notes

[TheeMahn]

I have nothing but positive feedback of Ultimate Edition 5.0, uploading to Sourceforge...

EDIT: 09/11/16: is available for , Ultimate Edition x86 5.0 is being built as I type . X86 Available for .

Building Ultimate Edition 5.0 x86

Pullting themes for 5.0 32 bit.

I feel will be a FAQ in 5.0:

Testing for compiz support in 5.0:

compiz --replace

in a terminal or terminator

You can do this off the live disk to verify compatibility. If the top bar of the window does not work, you are pretty much screwed. Reboot and install there will be no compiz for you. Ultimate Edition 5.0 uses the most cutting edge Xorg there is, if it does not work here it will not work anywhere 16.04 etc. Feel free to chime in if you feel I am wrong. Crack Pushers Xorg PPA.

Adding compiz to automatically fire up on boot. After you have installed Ultimate Edition 5.0 Navigate to System > Preferences > Personal > Startup applications:

Startup Applications

Save, log out and login or reboot.

Feedback good or bad is appreciated. Thanks for at least trying Ultimate Edition !!! I will expand this when I can, working 3 jobs takes it's toll I received a new title at work 2 weeks ago: MP2 Manager / Project Manager, why stop there I write software for them too. Underpaid there, but happy to have multiple incomes. Ultimate Edition is a very expensive hobby

TheeMahn,

[barney]

Hi,

Some feedback which I feel weird about as I know nothing about programing.

First, thank you for a very good OS, your hard work is appreciated.

Compiz in 5.0 is running CPU higher, this also happened with the official Ubuntu Mate 16.04, so it's not related to your build.

I also have no Ethernet connection with Ultimate Edition 5.0 which is odd given I have it with all other 16.04 releases, WIFI is fine.

The Kworker bug so far in Ultimate Edition is gone! So for that Sir I thank you.

When I try to add software through software and updates (other software) I get errors.

This is in my opinion the best Linux release of the year.

I will send you a beer. (well a donation)

[speedstream]

Hi Guys,

Just to let you know...

I just installed it and I am still discovering it.
There is one point I already noticed on the classic Ubuntu 16.04: the network performance with the Intel Gigabit Ethernet NIC embedded on my Z800 motherboard.
Performance divided by 2 !!!

Through UE4.6 (in fact through kernel 3.16 to 3.19) the minimum rate of transfer is around 80 MBytes/s. The peaks are around 100 MBytes and the average around 90 MB.
Through kernel 4.4: 48 MB... Impossible to reach more.

I have been testing this for weeks since I built up my Samba server (Debian 8.3 based). The rate of transfer was excellent with kernel 3.
No it's half of what it was.

So even if this is not specially linked with Ultimate Edition, I wish to share it just to know if people encounter the same problem and may have found a solution.

Except that, it looks to be a very good job. As usual

[Wangbo]

i too ran into the compiz problem on a whim after rebooting and resetting back to default i loaded the nvidia driver ( i have a nivida card installed) seemed to help the situation had tried earlier version (beta Ubuntu 16.04) and ran nividia driver with no problems until systemd updated a few times and after that and the newer kernel ( 4.4) seemed to get worse so maybe a combination of all three not playing well together but again a ubuntu problem have also tried and run mint with newer kernel ( again 4.4 ) in 17.3 Rosa with no problems at all running compiz with emerald , I have 4 different drives to play with so get to experiment and also helps to troubleshoot sometimes hope this helps the devs to figure this one out as im limited in my abilities.

[Ken]

I loaded version 5 onto a usb using Linux Mint's image writer, but the live session would not boot. Has anyone else had this problem? Does UNetbootin work?

[Ken]

[Wangbo]

Haven't been able to use either of what you mentioned for some time successfully but have been able to using Theemahns thumbos find the .deb file install it then in a terminal go to the directory contaning the iso file then issue the following command to install to a usb drive "sudo thumbos -l ultimate-edition-5.0-x64-lite-mate.iso sde
" sde being whatever the appropriate drive letter is for your usb drive then follow the commands and viola should work. The file you are looking for is utlimate_edition_thumbos_1.1.3.deb if can't find ask on here and someone should be able to direct you to it as i'm unsure how to attach it to this conversation or as to whether I'm allowed to

[2guntom]

[OlDrunk]

Great release! I'm glad to be switching to 5.0 from 3.4LTS , only bugs I've come across so far is "update-apt-xapian-index" crashes just about every login , the login screen graphically glitches out before dropping into desktop(minor issue), few times the system completely hanged on $ sudo reboot and had network manager(nm-applet) crash on me a couple of times lost the network icon but wi-fi connectivity remained, not sure if it is a compiz issue or what but MATE-panel has crashed a couple of times now adding or moving launcher icons, so far so good nothing major or really game breaking, I remember 3.4 had some issues in the beginning as well but cleared up after a few updates, so I'm not worried and confident in 5.0 being a fast and stable desktop on par with all other U.E releases.
Unrelated to U.E just a FYI - nvidia364/367 , 4.4kernel and xorg are not playing well together stick to 361 drivers or older till kernel 4.5/4.6 with xorg patch comes out or nvidia gets their $#!% together which ever comes first. I have a laptop with optimus so it was a real $#!% show for me with complete display loss and having to reinstall a few times.
Great Job on 5.0 and a cheers to TheeMahn, thanks for all the years of your hard work and time! I've been a loyal user of U.E since maverick.

[TheeMahn]