after some reboots and a little adjusting i was able to do an update to U>E 2.9 here is the X log after that ad still have the High Restoration.
some things i want to mention;the main board has analog nvida graphics chip a720 that ran fine connected to the hp 19 inch monitor with the nVIDA RESTRICTED DRIVERS INSTALLED ,AFTER THE PCIE 16X CARD WENT IN x WOULD NOT LOAD AT ALL.
HAD TO LOG IN AT THE COMMAND PROMPT AND DO THE STARTX AND GOT ,NO SUCH DIRECTORY EXIST.
on the next install and this 3rd one with out NVIDA RESTRICTED DRIVERS INSTALLED THE DISPLAY IS FINE
BUT AUDIO IS MESSED UP BAD.
I AM GETTING THE HDMI AUDIO COMING THROUGH THE SOUND BLASTER SEEKERS AND THE HDMI HAS NOE SOUND AT ALL.
I HAVE INSTALLED LATEST ALAS MIXER THROUGH COMMAND LINE AND NOTHING CHANGED.
THERE IS ANOTHER HIGH DEFINITION AUDIO CONTROLLER ON THE MOTHER BOARD THAT IS DISABLED IN BIOS
I HAD A BLUETOOTH ADAPTER AND A PINNICAL TV 800E USB THAT I TOOK OF THE SYSTEM BECAUSE IT SEAMED BOTH WHERE CAUSING ISSUES WITH THE SOUND DRIVERS.
NOW IF I SET THE AUDIO OUT PUT THE THE SOUND PLASTER AND SET THE PULSE AUDIO SERVER TO HANDEL THE STREAM IT WORKS BUT ONLY IN STAR UP THEN THE SIGNAL DROPS AND IT WILL ONLY PLAY A PCM STREAM NO MATER WHAT PLAYER OR STREAM IS BEING USED DTS DOUBLY ECT, I AM USING DIGITAL ONLY OUT AND IF I SET ALAS MIXER TO HANDLE THE SPFID AND PCM AS WELL AS OTHER SIGNALS, I GET NOTHING AT ALL.
I HAVE HAD SOME OLDER CREATIVE CARDS WORK LIVE 24BIT AND OTHERS AND GET THE CORRECT CONNECTION AND STREAM WHEN THERE.
WHEN CHANGING THE SETTINGS IN SOUND SETTINGS TO ANYTHING OTHER THEN THE DEFAULT IT MAKES THE PC UNRESPONSIVE WHERE IT RUNS WORST THEN A PENTIUM 3 WAITING AND HAVING TO CLICK WINDOWS 10X
TO CLOSE OR WAITE A LONG TIME AND NOT ABLE TO PLAY A DVD, ECT
UBUNTU IS PUSHING THE UPGRADE TO NO END BEFORE I EVEN INSTALLED THE OS A WINDOW POPPED UP FOR UPGRADING.
I BELIEVE THE HDMI AUDIO AND THE SOUND CARD ARE CAUSING THE ISSUES BUT NOT SURE
IS THERE ANY WAY FOR THEM TO DISRUPT NORMAL OPERATING OF U.E
- Code: Select all
[ 26.667]
X.Org X Server 1.9.0
Release Date: 2010-08-20
[ 26.667] X Protocol Version 11, Revision 0
[ 26.667] Build Operating System: Linux 2.6.24-28-server x86_64 Ubuntu
[ 26.667] Current Operating System: Linux kenneth-M68MT-S2P 2.6.35-25-generic #43-Ubuntu SMP Thu Jan 6 22:25:21 UTC 2011 x86_64
[ 26.667] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.35-25-generic root=UUID=c61f3e5c-83d5-44e8-88f2-a1d233a534ad ro quiet splash
[ 26.667] Build Date: 09 January 2011 12:14:27PM
[ 26.667] xorg-server 2:1.9.0-0ubuntu7.3 (For technical support please see http://www.ubuntu.com/support)
[ 26.667] Current version of pixman: 0.18.4
[ 26.667] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 26.667] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 26.667] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Jul 1 18:27:09 2011
[ 26.753] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 26.774] (==) No Layout section. Using the first Screen section.
[ 26.774] (==) No screen section available. Using defaults.
[ 26.774] (**) |-->Screen "Default Screen Section" (0)
[ 26.774] (**) | |-->Monitor "<default monitor>"
[ 26.793] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 26.793] (==) Automatically adding devices
[ 26.793] (==) Automatically enabling devices
[ 27.049] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 27.049] Entry deleted from font path.
[ 27.111] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
[ 27.111] (==) ModulePath set to "/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[ 27.111] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 27.111] (II) Loader magic: 0x7d17a0
[ 27.111] (II) Module ABI versions:
[ 27.111] X.Org ANSI C Emulation: 0.4
[ 27.111] X.Org Video Driver: 8.0
[ 27.111] X.Org XInput driver : 11.0
[ 27.111] X.Org Server Extension : 4.0
[ 27.112] (--) PCI:*(0:2:0:0) 10de:10c3:0000:0000 rev 162, Mem @ 0xfb000000/16777216, 0xc0000000/268435456, 0xde000000/33554432, I/O @ 0x0000ac00/128, BIOS @ 0x????????/524288
[ 27.112] (II) Open ACPI successful (/var/run/acpid.socket)
[ 27.112] (II) LoadModule: "extmod"
[ 27.137] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 27.147] (II) Module extmod: vendor="X.Org Foundation"
[ 27.147] compiled for 1.9.0, module version = 1.0.0
[ 27.147] Module class: X.Org Server Extension
[ 27.147] ABI class: X.Org Server Extension, version 4.0
[ 27.147] (II) Loading extension MIT-SCREEN-SAVER
[ 27.147] (II) Loading extension XFree86-VidModeExtension
[ 27.147] (II) Loading extension XFree86-DGA
[ 27.147] (II) Loading extension DPMS
[ 27.147] (II) Loading extension XVideo
[ 27.147] (II) Loading extension XVideo-MotionCompensation
[ 27.147] (II) Loading extension X-Resource
[ 27.147] (II) LoadModule: "dbe"
[ 27.147] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 27.157] (II) Module dbe: vendor="X.Org Foundation"
[ 27.157] compiled for 1.9.0, module version = 1.0.0
[ 27.157] Module class: X.Org Server Extension
[ 27.157] ABI class: X.Org Server Extension, version 4.0
[ 27.157] (II) Loading extension DOUBLE-BUFFER
[ 27.157] (II) LoadModule: "glx"
[ 27.157] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 27.180] (II) Module glx: vendor="X.Org Foundation"
[ 27.180] compiled for 1.9.0, module version = 1.0.0
[ 27.180] ABI class: X.Org Server Extension, version 4.0
[ 27.180] (==) AIGLX enabled
[ 27.180] (II) Loading extension GLX
[ 27.301] (II) LoadModule: "record"
[ 27.301] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 27.304] (II) Module record: vendor="X.Org Foundation"
[ 27.304] compiled for 1.9.0, module version = 1.13.0
[ 27.304] Module class: X.Org Server Extension
[ 27.304] ABI class: X.Org Server Extension, version 4.0
[ 27.304] (II) Loading extension RECORD
[ 27.304] (II) LoadModule: "dri"
[ 27.304] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 27.324] (II) Module dri: vendor="X.Org Foundation"
[ 27.324] compiled for 1.9.0, module version = 1.0.0
[ 27.324] ABI class: X.Org Server Extension, version 4.0
[ 27.324] (II) Loading extension XFree86-DRI
[ 27.324] (II) LoadModule: "dri2"
[ 27.324] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 27.326] (II) Module dri2: vendor="X.Org Foundation"
[ 27.326] compiled for 1.9.0, module version = 1.2.0
[ 27.326] ABI class: X.Org Server Extension, version 4.0
[ 27.326] (II) Loading extension DRI2
[ 27.326] (==) Matched nouveau as autoconfigured driver 0
[ 27.326] (==) Matched nv as autoconfigured driver 1
[ 27.326] (==) Matched vesa as autoconfigured driver 2
[ 27.326] (==) Matched fbdev as autoconfigured driver 3
[ 27.326] (==) Assigned the driver to the xf86ConfigLayout
[ 27.326] (II) LoadModule: "nouveau"
[ 27.326] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[ 27.350] (II) Module nouveau: vendor="X.Org Foundation"
[ 27.350] compiled for 1.8.99.905, module version = 0.0.16
[ 27.350] Module class: X.Org Video Driver
[ 27.350] ABI class: X.Org Video Driver, version 8.0
[ 27.350] (II) LoadModule: "nv"
[ 27.350] (II) Loading /usr/lib/xorg/modules/drivers/nv_drv.so
[ 27.358] (II) Module nv: vendor="X.Org Foundation"
[ 27.358] compiled for 1.8.99.905, module version = 2.1.17
[ 27.358] Module class: X.Org Video Driver
[ 27.358] ABI class: X.Org Video Driver, version 8.0
[ 27.358] (II) LoadModule: "vesa"
[ 27.358] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 27.364] (II) Module vesa: vendor="X.Org Foundation"
[ 27.364] compiled for 1.8.99.905, module version = 2.3.0
[ 27.364] Module class: X.Org Video Driver
[ 27.364] ABI class: X.Org Video Driver, version 8.0
[ 27.364] (II) LoadModule: "fbdev"
[ 27.364] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 27.489] (II) Module fbdev: vendor="X.Org Foundation"
[ 27.489] compiled for 1.8.99.905, module version = 0.4.2
[ 27.489] ABI class: X.Org Video Driver, version 8.0
[ 27.489] (II) NOUVEAU driver Date: Thu Aug 5 00:40:40 2010 +0200
[ 27.489] (II) NOUVEAU driver for NVIDIA chipset families :
[ 27.489] RIVA TNT (NV04)
[ 27.489] RIVA TNT2 (NV05)
[ 27.489] GeForce 256 (NV10)
[ 27.489] GeForce 2 (NV11, NV15)
[ 27.490] GeForce 4MX (NV17, NV18)
[ 27.490] GeForce 3 (NV20)
[ 27.490] GeForce 4Ti (NV25, NV28)
[ 27.490] GeForce FX (NV3x)
[ 27.490] GeForce 6 (NV4x)
[ 27.490] GeForce 7 (G7x)
[ 27.490] GeForce 8 (G8x)
[ 27.490] (II) NOUVEAU driver Date: Thu Aug 5 00:40:40 2010 +0200
[ 27.490] (II) NOUVEAU driver for NVIDIA chipset families :
[ 27.490] RIVA TNT (NV04)
[ 27.490] RIVA TNT2 (NV05)
[ 27.490] GeForce 256 (NV10)
[ 27.490] GeForce 2 (NV11, NV15)
[ 27.490] GeForce 4MX (NV17, NV18)
[ 27.490] GeForce 3 (NV20)
[ 27.490] GeForce 4Ti (NV25, NV28)
[ 27.490] GeForce FX (NV3x)
[ 27.490] GeForce 6 (NV4x)
[ 27.490] GeForce 7 (G7x)
[ 27.490] GeForce 8 (G8x)
[ 27.490] (II) VESA: driver for VESA chipsets: vesa
[ 27.490] (II) FBDEV: driver for framebuffer: fbdev
[ 27.490] (++) using VT number 7
[ 27.490] drmOpenDevice: node name is /dev/dri/card0
[ 27.490] drmOpenDevice: open result is 8, (OK)
[ 27.490] drmOpenByBusid: Searching for BusID pci:0000:02:00.0
[ 27.490] drmOpenDevice: node name is /dev/dri/card0
[ 27.490] drmOpenDevice: open result is 8, (OK)
[ 27.490] drmOpenByBusid: drmOpenMinor returns 8
[ 27.490] drmOpenByBusid: drmGetBusid reports pci:0000:02:00.0
[ 27.490] (II) [drm] nouveau interface version: 0.0.16
[ 27.490] (WW) Falling back to old probe method for vesa
[ 27.490] (WW) Falling back to old probe method for fbdev
[ 27.490] (II) Loading sub module "fbdevhw"
[ 27.490] (II) LoadModule: "fbdevhw"
[ 27.490] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 27.500] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 27.500] compiled for 1.9.0, module version = 0.0.2
[ 27.500] ABI class: X.Org Video Driver, version 8.0
[ 27.500] (II) Loading sub module "dri"
[ 27.500] (II) LoadModule: "dri"
[ 27.500] (II) Reloading /usr/lib/xorg/modules/extensions/libdri.so
[ 27.500] (II) NOUVEAU(0): Loaded DRI module
[ 27.500] drmOpenDevice: node name is /dev/dri/card0
[ 27.500] drmOpenDevice: open result is 9, (OK)
[ 27.500] drmOpenDevice: node name is /dev/dri/card0
[ 27.500] drmOpenDevice: open result is 9, (OK)
[ 27.500] drmOpenByBusid: Searching for BusID pci:0000:02:00.0
[ 27.500] drmOpenDevice: node name is /dev/dri/card0
[ 27.500] drmOpenDevice: open result is 9, (OK)
[ 27.500] drmOpenByBusid: drmOpenMinor returns 9
[ 27.500] drmOpenByBusid: drmGetBusid reports pci:0000:02:00.0
[ 27.500] (II) [drm] DRM interface version 1.3
[ 27.500] (II) [drm] DRM open master succeeded.
[ 27.500] (--) NOUVEAU(0): Chipset: "NVIDIA NVa8"
[ 27.500] (II) NOUVEAU(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 27.500] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
[ 27.500] (==) NOUVEAU(0): RGB weight 888
[ 27.500] (==) NOUVEAU(0): Default visual is TrueColor
[ 27.500] (==) NOUVEAU(0): Using HW cursor
[ 27.626] (II) NOUVEAU(0): Output DVI-I-1 has no monitor section
[ 27.827] (II) NOUVEAU(0): Output HDMI-1 has no monitor section
[ 27.924] (II) NOUVEAU(0): Output VGA-1 has no monitor section
[ 28.029] (II) NOUVEAU(0): EDID for output DVI-I-1
[ 28.230] (II) NOUVEAU(0): EDID for output HDMI-1
[ 28.230] (II) NOUVEAU(0): Manufacturer: TSB Model: 205 Serial#: 0
[ 28.230] (II) NOUVEAU(0): Year: 2007 Week: 0
[ 28.230] (II) NOUVEAU(0): EDID Version: 1.3
[ 28.230] (II) NOUVEAU(0): Digital Display Input
[ 28.230] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 105 vert.: 59
[ 28.230] (II) NOUVEAU(0): Gamma: 2.20
[ 28.230] (II) NOUVEAU(0): No DPMS capabilities specified
[ 28.230] (II) NOUVEAU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 28.230] (II) NOUVEAU(0): First detailed timing is preferred mode
[ 28.230] (II) NOUVEAU(0): redX: 0.625 redY: 0.340 greenX: 0.280 greenY: 0.595
[ 28.230] (II) NOUVEAU(0): blueX: 0.155 blueY: 0.070 whiteX: 0.283 whiteY: 0.298
[ 28.230] (II) NOUVEAU(0): Supported established timings:
[ 28.230] (II) NOUVEAU(0): 640x480@60Hz
[ 28.230] (II) NOUVEAU(0): Manufacturer's mask: 0
[ 28.230] (II) NOUVEAU(0): Supported detailed timing:
[ 28.230] (II) NOUVEAU(0): clock: 148.5 MHz Image Size: 708 x 398 mm
[ 28.230] (II) NOUVEAU(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 28.230] (II) NOUVEAU(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 28.230] (II) NOUVEAU(0): Supported detailed timing:
[ 28.230] (II) NOUVEAU(0): clock: 27.0 MHz Image Size: 708 x 398 mm
[ 28.230] (II) NOUVEAU(0): h_active: 720 h_sync: 736 h_sync_end 798 h_blank_end 858 h_border: 0
[ 28.230] (II) NOUVEAU(0): v_active: 480 v_sync: 489 v_sync_end 495 v_blanking: 525 v_border: 0
[ 28.230] (II) NOUVEAU(0): Monitor name: TSB-TV
[ 28.230] (II) NOUVEAU(0): Ranges: V min: 23 V max: 61 Hz, H min: 15 H max: 68 kHz, PixClock max 155 MHz
[ 28.230] (II) NOUVEAU(0): Supported detailed timing:
[ 28.230] (II) NOUVEAU(0): clock: 74.2 MHz Image Size: 708 x 398 mm
[ 28.230] (II) NOUVEAU(0): h_active: 1280 h_sync: 1390 h_sync_end 1430 h_blank_end 1650 h_border: 0
[ 28.230] (II) NOUVEAU(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0
[ 28.230] (II) NOUVEAU(0): Supported detailed timing:
[ 28.230] (II) NOUVEAU(0): clock: 27.0 MHz Image Size: 708 x 398 mm
[ 28.230] (II) NOUVEAU(0): h_active: 1440 h_sync: 1478 h_sync_end 1602 h_blank_end 1716 h_border: 0
[ 28.230] (II) NOUVEAU(0): v_active: 240 v_sync: 244 v_sync_end 247 v_blanking: 262 v_border: 0
[ 28.230] (II) NOUVEAU(0): Supported detailed timing:
[ 28.230] (II) NOUVEAU(0): clock: 27.0 MHz Image Size: 531 x 398 mm
[ 28.230] (II) NOUVEAU(0): h_active: 720 h_sync: 736 h_sync_end 798 h_blank_end 858 h_border: 0
[ 28.230] (II) NOUVEAU(0): v_active: 480 v_sync: 489 v_sync_end 495 v_blanking: 525 v_border: 0
[ 28.230] (II) NOUVEAU(0): Supported detailed timing:
[ 28.230] (II) NOUVEAU(0): clock: 27.0 MHz Image Size: 531 x 398 mm
[ 28.230] (II) NOUVEAU(0): h_active: 1440 h_sync: 1478 h_sync_end 1602 h_blank_end 1716 h_border: 0
[ 28.230] (II) NOUVEAU(0): v_active: 240 v_sync: 244 v_sync_end 247 v_blanking: 262 v_border: 0
[ 28.230] (II) NOUVEAU(0): Supported detailed timing:
[ 28.230] (II) NOUVEAU(0): clock: 74.2 MHz Image Size: 708 x 398 mm
[ 28.230] (II) NOUVEAU(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 28.230] (II) NOUVEAU(0): v_active: 540 v_sync: 542 v_sync_end 547 v_blanking: 562 v_border: 0
[ 28.230] (II) NOUVEAU(0): Number of EDID sections to follow: 1
[ 28.230] (II) NOUVEAU(0): EDID (in hex):
[ 28.230] (II) NOUVEAU(0): 00ffffffffffff005262050200000000
[ 28.230] (II) NOUVEAU(0): 0011010380693b780a0dc9a057479827
[ 28.230] (II) NOUVEAU(0): 12484c20000001010101010101010101
[ 28.230] (II) NOUVEAU(0): 010101010101023a801871382d40582c
[ 28.230] (II) NOUVEAU(0): 4500c48e2100001e8c0ad08a20e02d10
[ 28.230] (II) NOUVEAU(0): 103e9600c48e21000018000000fc0054
[ 28.230] (II) NOUVEAU(0): 53422d54560a202020202020000000fd
[ 28.230] (II) NOUVEAU(0): 00173d0f440f000a2020202020200103
[ 28.230] (II) NOUVEAU(0): Printing probed modes for output HDMI-1
[ 28.230] (II) NOUVEAU(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
[ 28.230] (II) NOUVEAU(0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz)
[ 28.230] (II) NOUVEAU(0): Modeline "720x480"x59.9 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz)
[ 28.230] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 28.328] (II) NOUVEAU(0): EDID for output VGA-1
[ 28.328] (II) NOUVEAU(0): Output DVI-I-1 disconnected
[ 28.328] (II) NOUVEAU(0): Output HDMI-1 connected
[ 28.328] (II) NOUVEAU(0): Output VGA-1 disconnected
[ 28.328] (II) NOUVEAU(0): Using exact sizes for initial modes
[ 28.328] (II) NOUVEAU(0): Output HDMI-1 using initial mode 1920x1080
[ 28.328] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 28.328] (--) NOUVEAU(0): Virtual size is 1920x1080 (pitch 1920)
[ 28.328] (**) NOUVEAU(0): Driver mode "1920x1080": 148.5 MHz (scaled from 0.0 MHz), 67.5 kHz, 60.0 Hz
[ 28.328] (II) NOUVEAU(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
[ 28.328] (**) NOUVEAU(0): Driver mode "1280x720": 74.2 MHz (scaled from 0.0 MHz), 45.0 kHz, 60.0 Hz
[ 28.328] (II) NOUVEAU(0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz)
[ 28.328] (**) NOUVEAU(0): Driver mode "720x480": 27.0 MHz (scaled from 0.0 MHz), 31.5 kHz, 59.9 Hz
[ 28.328] (II) NOUVEAU(0): Modeline "720x480"x59.9 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz)
[ 28.328] (**) NOUVEAU(0): Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
[ 28.328] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 28.328] (==) NOUVEAU(0): DPI set to (96, 96)
[ 28.328] (II) Loading sub module "wfb"
[ 28.328] (II) LoadModule: "wfb"
[ 28.328] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 28.498] (II) Module wfb: vendor="X.Org Foundation"
[ 28.498] compiled for 1.9.0, module version = 1.0.0
[ 28.498] ABI class: X.Org ANSI C Emulation, version 0.4
[ 28.498] (II) Loading sub module "fb"
[ 28.498] (II) LoadModule: "fb"
[ 28.498] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 28.579] (II) Module fb: vendor="X.Org Foundation"
[ 28.579] compiled for 1.9.0, module version = 1.0.0
[ 28.579] ABI class: X.Org ANSI C Emulation, version 0.4
[ 28.580] (II) Loading sub module "exa"
[ 28.580] (II) LoadModule: "exa"
[ 28.580] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 28.619] (II) Module exa: vendor="X.Org Foundation"
[ 28.619] compiled for 1.9.0, module version = 2.5.0
[ 28.619] ABI class: X.Org Video Driver, version 8.0
[ 28.619] (II) Loading sub module "shadowfb"
[ 28.619] (II) LoadModule: "shadowfb"
[ 28.619] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[ 28.664] (II) Module shadowfb: vendor="X.Org Foundation"
[ 28.664] compiled for 1.9.0, module version = 1.0.0
[ 28.664] ABI class: X.Org ANSI C Emulation, version 0.4
[ 28.664] (II) UnloadModule: "nv"
[ 28.664] (II) Unloading /usr/lib/xorg/modules/drivers/nv_drv.so
[ 28.664] (II) UnloadModule: "vesa"
[ 28.664] (II) Unloading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 28.664] (II) UnloadModule: "fbdev"
[ 28.664] (II) Unloading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 28.664] (II) UnloadModule: "fbdevhw"
[ 28.664] (II) Unloading /usr/lib/xorg/modules/libfbdevhw.so
[ 28.664] (--) Depth 24 pixmap format is 32 bpp
[ 28.671] (II) NOUVEAU(0): Opened GPU channel 2
[ 28.671] (II) NOUVEAU(0): [DRI2] Setup complete
[ 28.671] (II) NOUVEAU(0): [DRI2] DRI driver: nouveau
[ 28.671] (II) NOUVEAU(0): GART: 512MiB available
[ 28.675] (II) NOUVEAU(0): GART: Allocated 16MiB as a scratch buffer
[ 28.749] (II) EXA(0): Driver allocated offscreen pixmaps
[ 28.749] (II) EXA(0): Driver registered support for the following operations:
[ 28.749] (II) Solid
[ 28.749] (II) Copy
[ 28.749] (II) Composite (RENDER acceleration)
[ 28.749] (II) UploadToScreen
[ 28.749] (II) DownloadFromScreen
[ 28.749] (==) NOUVEAU(0): Backing store disabled
[ 28.749] (==) NOUVEAU(0): Silken mouse enabled
[ 28.766] (II) NOUVEAU(0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video.
[ 28.766] (II) NOUVEAU(0): [XvMC] Extension initialized.
[ 28.766] (==) NOUVEAU(0): DPMS enabled
[ 28.766] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 28.767] (--) RandR disabled
[ 28.767] (II) Initializing built-in extension Generic Event Extension
[ 28.767] (II) Initializing built-in extension SHAPE
[ 28.767] (II) Initializing built-in extension MIT-SHM
[ 28.767] (II) Initializing built-in extension XInputExtension
[ 28.767] (II) Initializing built-in extension XTEST
[ 28.767] (II) Initializing built-in extension BIG-REQUESTS
[ 28.767] (II) Initializing built-in extension SYNC
[ 28.767] (II) Initializing built-in extension XKEYBOARD
[ 28.767] (II) Initializing built-in extension XC-MISC
[ 28.767] (II) Initializing built-in extension SECURITY
[ 28.767] (II) Initializing built-in extension XINERAMA
[ 28.767] (II) Initializing built-in extension XFIXES
[ 28.767] (II) Initializing built-in extension RENDER
[ 28.767] (II) Initializing built-in extension RANDR
[ 28.767] (II) Initializing built-in extension COMPOSITE
[ 28.767] (II) Initializing built-in extension DAMAGE
[ 28.767] (II) Initializing built-in extension GESTURE
[ 28.806] (II) AIGLX error: dlopen of /usr/lib/dri/nouveau_dri.so failed (/usr/lib/dri/nouveau_dri.so: cannot open shared object file: No such file or directory)
[ 28.806] (II) AIGLX: reverting to software rendering
[ 28.807] (II) AIGLX: Screen 0 is not DRI capable
[ 29.051] (II) AIGLX: Loaded and initialized /usr/lib/dri/swrast_dri.so
[ 29.051] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 29.066] (II) NOUVEAU(0): NVEnterVT is called.
[ 29.066] (II) NOUVEAU(0): Setting screen physical size to 508 x 285
[ 29.066] resize called 1920 1080
[ 30.207] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[ 30.677] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 30.677] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 30.677] (II) LoadModule: "evdev"
[ 30.678] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 30.794] (II) Module evdev: vendor="X.Org Foundation"
[ 30.794] compiled for 1.9.0, module version = 2.3.2
[ 30.794] Module class: X.Org XInput Driver
[ 30.794] ABI class: X.Org XInput driver, version 11.0
[ 30.795] (**) Power Button: always reports core events
[ 30.795] (**) Power Button: Device: "/dev/input/event1"
[ 30.860] (II) Power Button: Found keys
[ 30.860] (II) Power Button: Configuring as keyboard
[ 30.860] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 30.861] (**) Option "xkb_rules" "evdev"
[ 30.861] (**) Option "xkb_model" "pc105"
[ 30.861] (**) Option "xkb_layout" "us"
[ 30.865] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 30.865] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 30.865] (**) Power Button: always reports core events
[ 30.865] (**) Power Button: Device: "/dev/input/event0"
[ 30.950] (II) Power Button: Found keys
[ 30.950] (II) Power Button: Configuring as keyboard
[ 30.950] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 30.950] (**) Option "xkb_rules" "evdev"
[ 30.950] (**) Option "xkb_model" "pc105"
[ 30.950] (**) Option "xkb_layout" "us"
[ 30.952] (II) config/udev: Adding input device Microsft Microsoft Wireless Desktop Receiver 3.1 (/dev/input/event2)
[ 30.952] (**) Microsft Microsoft Wireless Desktop Receiver 3.1: Applying InputClass "evdev keyboard catchall"
[ 30.952] (**) Microsft Microsoft Wireless Desktop Receiver 3.1: always reports core events
[ 30.952] (**) Microsft Microsoft Wireless Desktop Receiver 3.1: Device: "/dev/input/event2"
[ 30.990] (II) Microsft Microsoft Wireless Desktop Receiver 3.1: Found keys
[ 30.990] (II) Microsft Microsoft Wireless Desktop Receiver 3.1: Configuring as keyboard
[ 30.990] (II) XINPUT: Adding extended input device "Microsft Microsoft Wireless Desktop Receiver 3.1" (type: KEYBOARD)
[ 30.990] (**) Option "xkb_rules" "evdev"
[ 30.990] (**) Option "xkb_model" "pc105"
[ 30.990] (**) Option "xkb_layout" "us"
[ 30.991] (II) config/udev: Adding input device Microsft Microsoft Wireless Desktop Receiver 3.1 (/dev/input/event3)
[ 30.991] (**) Microsft Microsoft Wireless Desktop Receiver 3.1: Applying InputClass "evdev pointer catchall"
[ 30.991] (**) Microsft Microsoft Wireless Desktop Receiver 3.1: Applying InputClass "evdev keyboard catchall"
[ 30.991] (**) Microsft Microsoft Wireless Desktop Receiver 3.1: always reports core events
[ 30.991] (**) Microsft Microsoft Wireless Desktop Receiver 3.1: Device: "/dev/input/event3"
[ 31.050] (II) Microsft Microsoft Wireless Desktop Receiver 3.1: Found 9 mouse buttons
[ 31.050] (II) Microsft Microsoft Wireless Desktop Receiver 3.1: Found scroll wheel(s)
[ 31.050] (II) Microsft Microsoft Wireless Desktop Receiver 3.1: Found relative axes
[ 31.050] (II) Microsft Microsoft Wireless Desktop Receiver 3.1: Found x and y relative axes
[ 31.050] (II) Microsft Microsoft Wireless Desktop Receiver 3.1: Found absolute axes
[ 31.050] (II) evdev-grail: failed to open grail, no gesture support
[ 31.050] (II) Microsft Microsoft Wireless Desktop Receiver 3.1: Found keys
[ 31.050] (II) Microsft Microsoft Wireless Desktop Receiver 3.1: Configuring as mouse
[ 31.050] (II) Microsft Microsoft Wireless Desktop Receiver 3.1: Configuring as keyboard
[ 31.050] (**) Microsft Microsoft Wireless Desktop Receiver 3.1: YAxisMapping: buttons 4 and 5
[ 31.050] (**) Microsft Microsoft Wireless Desktop Receiver 3.1: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 31.050] (II) XINPUT: Adding extended input device "Microsft Microsoft Wireless Desktop Receiver 3.1" (type: KEYBOARD)
[ 31.050] (**) Option "xkb_rules" "evdev"
[ 31.050] (**) Option "xkb_model" "pc105"
[ 31.050] (**) Option "xkb_layout" "us"
[ 31.051] (II) Microsft Microsoft Wireless Desktop Receiver 3.1: initialized for relative axes.
[ 31.051] (WW) Microsft Microsoft Wireless Desktop Receiver 3.1: ignoring absolute axes.
[ 31.052] (II) config/udev: Adding input device Microsft Microsoft Wireless Desktop Receiver 3.1 (/dev/input/mouse0)
[ 31.052] (II) No input driver/identifier specified (ignoring)
[ 31.060] (II) config/udev: Adding input device ImPS/2 Logitech Wheel Mouse (/dev/input/event4)
[ 31.060] (**) ImPS/2 Logitech Wheel Mouse: Applying InputClass "evdev pointer catchall"
[ 31.060] (**) ImPS/2 Logitech Wheel Mouse: always reports core events
[ 31.060] (**) ImPS/2 Logitech Wheel Mouse: Device: "/dev/input/event4"
[ 31.150] (II) ImPS/2 Logitech Wheel Mouse: Found 3 mouse buttons
[ 31.150] (II) ImPS/2 Logitech Wheel Mouse: Found scroll wheel(s)
[ 31.150] (II) ImPS/2 Logitech Wheel Mouse: Found relative axes
[ 31.150] (II) ImPS/2 Logitech Wheel Mouse: Found x and y relative axes
[ 31.150] (II) ImPS/2 Logitech Wheel Mouse: Configuring as mouse
[ 31.150] (**) ImPS/2 Logitech Wheel Mouse: YAxisMapping: buttons 4 and 5
[ 31.150] (**) ImPS/2 Logitech Wheel Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 31.150] (II) XINPUT: Adding extended input device "ImPS/2 Logitech Wheel Mouse" (type: MOUSE)
[ 31.150] (II) ImPS/2 Logitech Wheel Mouse: initialized for relative axes.
[ 31.151] (II) config/udev: Adding input device ImPS/2 Logitech Wheel Mouse (/dev/input/mouse1)
[ 31.151] (II) No input driver/identifier specified (ignoring)
[ 38.784] (II) NOUVEAU(0): EDID vendor "TSB", prod id 517
[ 38.784] (II) NOUVEAU(0): Using EDID range info for horizontal sync
[ 38.784] (II) NOUVEAU(0): Using EDID range info for vertical refresh
[ 38.784] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 38.784] (II) NOUVEAU(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
[ 38.784] (II) NOUVEAU(0): Modeline "720x480"x0.0 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz)
[ 38.784] (II) NOUVEAU(0): Modeline "1280x720"x0.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz)
[ 38.784] (II) NOUVEAU(0): Modeline "1440x480i"x0.0 27.00 1440 1478 1602 1716 480 488 494 525 interlace -hsync -vsync (15.7 kHz)
[ 38.784] (II) NOUVEAU(0): Modeline "1920x1080i"x0.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz)
[ 38.784] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 38.784] (II) NOUVEAU(0): Modeline "720x576"x0.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz)
[ 38.784] (II) NOUVEAU(0): Modeline "1440x240"x0.0 27.00 1440 1478 1602 1716 240 244 247 262 -hsync -vsync (15.7 kHz)
[ 38.784] (II) NOUVEAU(0): Modeline "1920x1080"x0.0 74.25 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (28.1 kHz)
[ 38.784] (II) NOUVEAU(0): Modeline "2880x480"x0.0 108.00 2880 2944 3192 3432 480 489 495 525 -hsync -vsync (31.5 kHz)
[ 39.430] (II) NOUVEAU(0): EDID vendor "TSB", prod id 517
[ 39.510] (II) NOUVEAU(0): Using hsync ranges from config file
[ 39.510] (II) NOUVEAU(0): Using vrefresh ranges from config file
[ 39.510] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 39.510] (II) NOUVEAU(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
[ 39.510] (II) NOUVEAU(0): Modeline "720x480"x0.0 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz)
[ 39.510] (II) NOUVEAU(0): Modeline "1280x720"x0.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz)
[ 39.510] (II) NOUVEAU(0): Modeline "1440x480i"x0.0 27.00 1440 1478 1602 1716 480 488 494 525 interlace -hsync -vsync (15.7 kHz)
[ 39.510] (II) NOUVEAU(0): Modeline "1920x1080i"x0.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz)
[ 39.510] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 39.510] (II) NOUVEAU(0): Modeline "720x576"x0.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz)
[ 39.510] (II) NOUVEAU(0): Modeline "1440x240"x0.0 27.00 1440 1478 1602 1716 240 244 247 262 -hsync -vsync (15.7 kHz)
[ 39.510] (II) NOUVEAU(0): Modeline "1920x1080"x0.0 74.25 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (28.1 kHz)
[ 39.510] (II) NOUVEAU(0): Modeline "2880x480"x0.0 108.00 2880 2944 3192 3432 480 489 495 525 -hsync -vsync (31.5 kHz)
[ 40.294] (II) NOUVEAU(0): EDID vendor "TSB", prod id 517
[ 40.294] (II) NOUVEAU(0): Using hsync ranges from config file
[ 40.294] (II) NOUVEAU(0): Using vrefresh ranges from config file
[ 40.294] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 40.294] (II) NOUVEAU(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
[ 40.294] (II) NOUVEAU(0): Modeline "720x480"x0.0 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz)
[ 40.294] (II) NOUVEAU(0): Modeline "1280x720"x0.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz)
[ 40.294] (II) NOUVEAU(0): Modeline "1440x480i"x0.0 27.00 1440 1478 1602 1716 480 488 494 525 interlace -hsync -vsync (15.7 kHz)
[ 40.294] (II) NOUVEAU(0): Modeline "1920x1080i"x0.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz)
[ 40.294] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 40.294] (II) NOUVEAU(0): Modeline "720x576"x0.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz)
[ 40.294] (II) NOUVEAU(0): Modeline "1440x240"x0.0 27.00 1440 1478 1602 1716 240 244 247 262 -hsync -vsync (15.7 kHz)
[ 40.294] (II) NOUVEAU(0): Modeline "1920x1080"x0.0 74.25 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (28.1 kHz)
[ 40.294] (II) NOUVEAU(0): Modeline "2880x480"x0.0 108.00 2880 2944 3192 3432 480 489 495 525 -hsync -vsync (31.5 kHz)
[ 40.615] resize called 1920 1080
[ 51.301] (II) NOUVEAU(0): EDID vendor "TSB", prod id 517
[ 51.301] (II) NOUVEAU(0): Using hsync ranges from config file
[ 51.302] (II) NOUVEAU(0): Using vrefresh ranges from config file
[ 51.302] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 51.302] (II) NOUVEAU(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
[ 51.302] (II) NOUVEAU(0): Modeline "720x480"x0.0 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz)
[ 51.302] (II) NOUVEAU(0): Modeline "1280x720"x0.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz)
[ 51.302] (II) NOUVEAU(0): Modeline "1440x480i"x0.0 27.00 1440 1478 1602 1716 480 488 494 525 interlace -hsync -vsync (15.7 kHz)
[ 51.302] (II) NOUVEAU(0): Modeline "1920x1080i"x0.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz)
[ 51.302] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 51.302] (II) NOUVEAU(0): Modeline "720x576"x0.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz)
[ 51.302] (II) NOUVEAU(0): Modeline "1440x240"x0.0 27.00 1440 1478 1602 1716 240 244 247 262 -hsync -vsync (15.7 kHz)
[ 51.302] (II) NOUVEAU(0): Modeline "1920x1080"x0.0 74.25 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (28.1 kHz)
[ 51.302] (II) NOUVEAU(0): Modeline "2880x480"x0.0 108.00 2880 2944 3192 3432 480 489 495 525 -hsync -vsync (31.5 kHz)