Ultimate Edition 2.1 has been released.

[stanca]

During the install process try checking "automatic login" box and see what hapens after.

[BluShark]

So i finally got some time to post the images about the upgrade thingies.


If you have anything to suggest it will be welcome. And earlier i bumped on a installation guide as it seemed and it had something about the updates that i found interesting. It was in this topic and it was really big to miss. But i didn't have time to test it and now i can't find it. If anyone knows about it plz link it to me.

Thanks in advance, and amazing work.

[pch.shot]

I don't know where you got that but we have no official installation guide. If you got it from here it was nothing official and was probably deleted so as not to confuse people like you. I don't know how you can read that anyway!!

[BluShark]

I didn't try anything that it wrote i just read it while i was in class. So any idea about the errors of the upgrades?

[SaddleTramp]

Ok guys 'n gals...I've burnt up lots of grey matter in trying to hunt my problem down and this is where I've gotten...
This is from 2.6.27-9 which is working and how I'm online now: UTStarcom UM150 (Pantech) USB Wireless Card (Dongle) (i.e. not as in Wireless WAN/LAN...it's an aircard)

Code: Select all

$ sudo dmesg

<<<< just part that applies to Pantech >>>>

usb 1-4: new low speed USB device using ohci_hcd and address 2
[    4.678942] usb 1-4: configuration #1 chosen from 1 choice
[    4.684476] usbcore: registered new interface driver libusual
[    4.693081] Initializing USB Mass Storage driver...
[    4.694454] scsi4 : SCSI emulation for USB Mass Storage devices
[    4.694621] usbcore: registered new interface driver usb-storage
[    4.694625] USB Mass Storage support registered.
[    4.694633] usb-storage: device found at 3
[    4.694635] usb-storage: waiting for device to settle before scanning
[    9.692265] usb-storage: device scan complete
[    9.694845] scsi 4:0:0:0: Direct-Access     PANTECH  Mass Storage     0001 PQ: 0 ANSI: 0 CCS
[    9.696165] sd 4:0:0:0: [sdd] Attached SCSI removable disk
[    9.696287] sd 4:0:0:0: Attached scsi generic sg5 type 0

[   13.920506] cdc_acm 2-6:1.0: ttyACM0: USB ACM device
[   13.922101] usbcore: registered new interface driver cdc_acm
[   13.922107] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters

...from 2.6.27-11...NOT working:

Code: Select all

$ sudo dmesg

<<<< just part that applies to Pantech >>>>

[    3.893021] usb 1-4: new low speed USB device using ohci_hcd and address 2
[    4.105208] usb 1-4: configuration #1 chosen from 1 choice
[    4.108426] usbcore: registered new interface driver libusual
[    4.114684] Initializing USB Mass Storage driver...
[    4.114832] scsi2 : SCSI emulation for USB Mass Storage devices
[    4.114942] usb-storage: device found at 3
[    4.114947] usb-storage: waiting for device to settle before scanning
[    4.114959] usbcore: registered new interface driver usb-storage
[    4.114963] USB Mass Storage support registered.
[    9.116222] usb-storage: device scan complete
[    9.119056] scsi 2:0:0:0: Direct-Access     PANTECH  Mass Storage     0001 PQ: 0 ANSI: 0 CCS
[    9.120136] sd 2:0:0:0: [sdd] Attached SCSI removable disk
[    9.120282] sd 2:0:0:0: Attached scsi generic sg5 type 0

[   13.295901] cdc_acm 2-6:1.0: ttyACM0: USB ACM device
[   13.300323] usbcore: registered new interface driver cdc_acm
[   13.300342] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters

[   13.326771] usbcore: registered new interface driver usbserial
[   13.326790] usbserial: USB Serial support registered for generic
[   13.326822] usbcore: registered new interface driver usbserial_generic
[   13.326824] usbserial: USB Serial Driver core
[   13.353683] usbserial: USB Serial support registered for GSM modem (1-port)
[   13.353722] option 2-6:1.2: GSM modem (1-port) converter detected
[   13.353942] usb 2-6: GSM modem (1-port) converter now attached to ttyUSB0
[   13.353963] usbcore: registered new interface driver option
[   13.353965] option: USB Driver for GSM modems: v0.7.2

I've gone thru all the files between the two and have found they are identical...so I'm thinking there has got to be a glitch in the way the 2.6.27-11 &-12 kernals are loading the relative files that make all this work...which is to say the problem lies within the kernals themselves. There has been a number of bug reports submitted to the same or similar modem problems that have affected various brands of modems. Have not seen anything about a patch that's out (unless I missed it somewhere). Anyway, I've got 2.1 running with kernal 2.6.27-9 and haven't had any problems to date. If anyone sees or comes across a fix for this I'd appreciate it very much if you would let me know. Now I'm gonna forget about this for a little bit and try to regrow that grey matter

[Moebius]

So i finally got some time to post the images about the upgrade thingies.


If you have anything to suggest it will be welcome. And earlier i bumped on a installation guide as it seemed and it had something about the updates that i found interesting. It was in this topic and it was really big to miss. But i didn't have time to test it and now i can't find it. If anyone knows about it plz link it to me.

Thanks in advance, and amazing work.

Hiya,
with regard to your first image try this;

In a terminal, type the following

gpg --keyserver subkeys.pgp.net --recv F120156012B83718
gpg --export --armor F120156012B83718 | sudo apt-key add -

Where F120156012B83718 needs to be replaced with the pubkey number you are missing.
Do this for each pubkey thats missing - worked for me.

Secondly, libcairo2 update will not update as there is a dependency issue. I don't think we can do anything about that apart from wait till a fix comes through the stream.

Hope it helps.

[pch.shot]

Like I said, go to the web site and get the key yourself!!!!
Here is an example: https://help.ubuntu.com/community/Medibuntu

[pch.shot]

The time people waste on certain things amazes me!!!!

[Moebius]

Would you happen to know of a method that we can get this done in one command? It would be really nice to be able to fix this problem without the need to do it to each error.

I Believe Nick may have the answer you're looking for here:
viewtopic.php?f=7&t=2720

Cheers.

[tuxsax]

Like I said, go to the web site and get the key yourself!!!!
Here is an example: https://help.ubuntu.com/community/Medibuntu

No, I want some one else to do the work for me. How many times do I have to remind you of my epic laziness.

I believe I gave you something too, here: viewtopic.php?f=7&t=2720#p29939

You're lazy even to try that one too??