Page 1 of 1

Ultimate edition 4.2 lite

PostPosted: Wed Oct 29, 2014 2:28 pm
by wildchildman
:D Im very happy to say I have finaly gotten my Ultimate Edition 4.2 L to boot and Im loving it because its got so many way's to customize it for your own likes far more than windows ever allowed. Windows OS are junk compared to Linux ,but I would love to see Theeman build a OS that was all click button option comand rather typing in command promts.
But to be honest :roll: i was dissapoint at first with all the boot problems, I had installed this beside my Windows OS accepting the split partition that was dissplayed on the setup screen, it showed a split partition of 90gb/30gb on my 120gb SSD but when it failed to boot I went back into my windows to view the partition set up and it was in a 3 set up / / / mode.... windows/ linux/linux and it would fail to boot like this , it could not even work in recovery mode it would say no such file found, every command I would give it from : boot -recover- shut systen down ...

My computer :
Asus sabertooth 990FX R2.0
AMD FX-8350 Black Edition Vishera 8-Core 4.0GHz (4.2GHz processor
2 x MSI-R6870-twin-frozr-ii-AMD-Radeon-HD-6870-video-card running crossfire
4 x 4gb Corsair Vengeance DDR3 memory
OCZ Vertex 4 VTX4-25SAT3-128G 2.5" 128GB SATA III MLC Internal Solid State Drive (SSD) Main drive
Seagate Barracuda ST2000DM001 2TB 7200 RPM 64MB Cache SATA 6.0Gb/s 3.5" Internal Hard Drive Bare Drive ( storage)
LIAN LI PC-D600 computer case
2 x Cooler Master Silent Pro M2 - 850W Power Supply
Completely water cooled by 3 looped systems and a 560 watt peltier cooler

When I turned off the computer after failure to boot the screen would blink to the ultimate home page with red circle rotating so you could see that the OS was running then it quickly would turn off .
Now a buddy of mine said it could be my crossfire set up.... that was confussing it not to display , but my system was not running in crossfire mode without the controler being installed at this point ,so cross out the crossfire thieory. To make a long story short after many failed attempts I finally decided to load it and let it wipe out my windows and wha-la it booted ..... lesson learned Linux will not boot when installed in a split configuration on the linux partition side.... ex. Linux/linux it cant read past the partition dividers .... Now Im no Computer Guru as you may detect in reading this :oops: and thats why I said it would be nice to see a linux OS that was all click on button command <BREW> If anyone can see past my conclustion here as to the real problem ....Please jump Im,Im here to learn :geek: And please excuse the miss spelt words my spell check would not work here on this post :oops: