Hi folks
I have purchased a cheap and cheerful wireless USB device to use instead of hardwire to the router.
It is a Realtek or Ralink if you like model 2070.
I believe I have installed the software properly and it looks like I should be able to open a GUI to set the wireless up but, for the life of me I can't find the file that will open the GUI.
It seems to have been built using QT if I understand things correctly.
I no nothing about QT which probably doesn't help.
Any way in the Readme there is a whole host of information and examples to apply in Terminal by the looks of it. One example is as follows;
Config STA to Link with Ad-hoc and OPEN/NONE (Authentication/Encryption)
1. iwconfig rausb0 mode ad-hoc
2. iwconfig rausb0 key off
3. iwconfig rausb0 essid "AP's SSID"
Now I think I realize the last line is setting the name of the wireless signal so no problem there but, before I even get to that I can't get past 1. When I enter the code I get the message:
Error for wireless request "Set Mode" (8B06)
Set failed in device rausb0 ; No such device
So, I did lsusb and here is the line for the device;
Bus 001 Device 002: ID 148f:2070 Ralink Technology, Corp.
It seems the system sees the device but, I don't undestand how to get it working.
Please help guide me through things - anyone.
Thanks.