Welcome to the forum....you posted in Ultimate Edition 2.4 but your sig says Ultimate Edition 2.8 64 BIT??
Some specs in your signature will help vastly!
SOLUTIONFor Epson L100Please download the following driver :
http://linux.avasys.jp/drivers/lsb/epso ... 2_i386.debIf the link doesn't work go to :
http://avasys.jp/eng/linux_driver/downl ... kjet/escp/then, scroll down until you find Stylus N10 or Stylus N11.
Download the driver according your system (32 bit or 64bit)
Disconnect the Epson L100 / L200 USB printer cable, install the driver, then connect the cable -> push start button
It will try to search the driver but no luck, just "cancel" it.
Then in "Choose Driver", make sure you tick the "Select printer form database"
choose [Epson] -> [Stylus N10 N11] -> [Forward] -> [Apply] -> give any names if necessary. Done.
For Epson 200Same as the above for L100, with additional files for scanning to download i.e. :
the data
http://linux.avasys.jp/drivers/iscan-da ... -0_all.deband the core
http://linux.avasys.jp/drivers/iscan/2. ... 7_i386.debInstall it and restart ......
You can print and scan now ... For scanning, just use xsane or any other scan s/w.
note:for the core files, you have to make sure, what types of processor (CPU) you're running and Ubuntu version.
Please go to this site :
http://www.avasys.jp/lx-bin2/linux_e/spc/DL1.do to change (just scroll down the page until you see "L200", tick it and choose whatever Linux and its version).
That's all, hope it help.