Ultimate Edition Forum

The case:


Water cooling that i orderd:


All the parts together:


CPU block:


the box of the pump:


The pump itself:


Radiator:




The water tank with his stand:


Water tank:



The water tank stand:


The fittings that came with the water tank (i didnt used them):


The good quallty fitting that i ordered (there is more)+fill port


The diy that make the water green and glows with UV light:


some tube:


Cold cattode's:


Testing and cleaning:


My computer before taking it apart:


The case "naked" from all the plastics and FAN's:


Everything Out of the case:


The FAN's connected to the radiator:


The water tank stand will attach to the 5.25 - 3.5 adapter:








Hole driiled:


The stand connected to the adapter:





Water tank connected to his stand:


the pump is installed into the case:


the water tank installed into the case:


The radiator installed:


Marking the hole that i'll cut for the ball vallve:


the hole cuted:


the ball vallve installed:


other side:


The fill port installed to the to panel:


Other side of the panel:


some bund's:


all connected (beside the fill port):


The mass at the time of working:


My computer without case (allmost complitelly passive)


I rotated the pump because of tube "breaking":


The computer without left door - in the light:


The computer without left door - in the dark



The computer with left door - in the dark:



some package:

Jet Lighters:
2000C:

1300C:


Third hand:



Box of LED's, resistors and so on...:



Another Box...:



It's not done yet!

*i'm sorry about my english.

if it is'nt the place to post this thered, please move it to the right place.

What do you plan on overclocking?We need some hardware specs

My HardWare is:
CPU: E7200 2.53Ghz
MoBo: GigaByte p35-ds3l
RAM: 2X2GB 800Mhz G.skill pai
Video card: 9600GSO (when i'll have the mony, i'll replace it to HD4850)
cursair 450W vx
RAID 0: 500x2 (it's verry hot!)
and 3 more HDD's

i'm now on OC of 3.60Ghz, it was stable on 3.80Ghz , but the summer of israel is very hot/
I planing to install Air-conditioner in a few day's and then i hope to get more then 4Ghz.

Do you have a screen shot of cpu-z with your oc?

Very nice man.

Update:

Fron FAN: 4 green LED's



Side FAN: 2 Blue and 2 UV LED's





Sorry about the quality, was filmed with the iPhone - in reality it is much more beautiful, of course.

OK, my question is what kind of license does it take to operate it ! and where do you land it !?
Very nice indeed ! I bet the lites in your neighborhood dim when you kick that baby in !

New package:



Not sure I'll use all the connectors I bought (24 scares me ....)
About the sliving, it's especially for fans, panel, etc., because the psu is already slived

]The package[/b]


Sata II Cables glowing in UV (everything else installed, just this was short an inch to the Raid card):


molex connectors glowing in UV, ATX dismantling tool (unfortunately not quite working):


38 mm fan screws for the radiator:


Funbus:


FAN's


Sliving the glowing in UV:


Blue ccfl:


Many springs against "breaking" tube:


[size=15pt]FAN's sliving:[/size]

I took all the fans from their boxes:


I used blue sliving that sensitive to UV:

I took the connectors of the fans:


I used a blue UV sensitive Heat Shrink:


All the FAN's slived:


Here you can see the FanBus and also the little button that very useful for OverClockers, 1 click to restore the default settings of the Bios:


(There are a lot of cables the is not slived and not orginazed, it will be handled later):






Next update will be the temperature of the computer, I'm very, very happy with them (except that my computer sounds like a helicopter).

Temp
Bios:


OCCT
* Down it's the time in minutes, in the left side it's the temperature.
Green - CPU Usage.
Red - temperature

cpu:


Core 1:


Core 2:


All that's left now is OC